How to Get Rid of Bathroom Mould


As you all know mould can start out as a small spot but it becomes bigger every day with stink. After that, the sight looks more disgusting and you can’t handle it. In some cases, it becomes a health hazard. Most people buy expensive materials to avoid this problem but fortunately, you can clean it in your way. To tackle this problem, you have to clean your bathroom daily and fortunately you can avoid this problem.

Mould comes in every colour and it is typically caused by the bacteria. It comes at any place like on a toilet seat on walls. You have to clean your bathroom daily and these easy steps prevent it from coming back. The bacteria are grown up in our bathrooms with the humid environment and especially in case of post-shower or bath. To properly care your bathroom, you have to remove the mould from tile grout. You easily can avoid that from a good scrub and baking soda.

Tips which help you to make your bathroom clean easily

  • You can use baking soda and bleach
  • Vinegar is the best solution
  • Borax is an important aspect to clean it
  • You can use ammonia
  • Hydrogen peroxide
  • Scrub the bathroom
  • Open the window to remove the stink

You can use baking soda and bleach

To clean your bathroom, you have to use hot water with soap and baking soda to remove the most of mould. This is an inexpensive material which you can use to clean your bathroom mould. You can try this one recipe to clean your washroom and make your recipe a perfect cleaner of a bathroom.

  • You have to get one teaspoon of liquid soap to clean it
  • After that, you need to get one cup of baking soda.
  • There is also need of several drops like citrus, rosemary, lavender and peppermint.
  • Now you have to put enough water and make the paste of that material.
  • You also can use this solution to clean your bathroom mould and mix a solution of 1 phase of bleach to 2 phase water. After that transfer it to spray bottle and spray that on the area of mould. You need to wait until that time when that sprays water dry.
  • Now you have to spray that solution the second time and scrub that with a brush. After that, you have to repeat that one until the mould is gone from that thing.
  • In the end, you can replace the caulk when you can’t get rid out from the stink and mould.

Vinegar is the best solution

There is one more solution that you can use to remove the entire dirt from a bathroom. You have needed to put a mild white vinegar solution in a spray bottle but keep remember that you don’t need to dilute that. Vinegar has acid particles that have to spray anywhere and it moulds the bacteria from your bathroom. You have to use it as full strength and there is no need to mix the water in it.

Now you have to spray the vinegar on mould places and wait for sometime like an hour. If possible then you have to make your bathroom air out and keep the fresh air in. after that, you have to wipe the areas with clean hot water and make dry that surface with a towel. Surfaces which are damp encourage growth so be sure and wipe the area properly. When you wiped the vinegar once then it should not smell anymore. Actually, vinegar is known to kill 82% bacteria from mould places. You can use this solution and make your bathroom own place instead of inhabiting. One more benefit of this solution that it doesn’t contain any toxic fumes and it is all natural.

Borax is an important aspect to clean it

Whenever you think about to clean the bathroom mould then you have to mix one cup of borax with one gallon of water. Borax is a natural cleaner and also serves as a natural insecticide. This solution is actually quite effective and cheaper one which is available faster. You can get this one from your near grocery store and clean your bathroom mould and stink. You have to use the vacuum cleaner before to use this solution on mould places. This will minimize the chance that you will spread spores and remove those particles instead of cleaning them. With help of a brush, you can attack the mould places and also use borax solution.

Be easy when you clean the place and mould that spores travelling to different areas. You don’t want to give the mould as like a new place. Now you have needed to wipe up the borax solution and let dry that. If you see that area is not cleaning then you can spray on that area again.

You can use ammonia

There is one more solution that you can use to remove dust and bacteria particles from your bathroom. You can use ammonia solution to clean the mould place and remember that don’t mix ammonia and bleach together. When you mix the bleach with ammonia then it creates a toxic substance which can be dangerous for you. This means you have to avoid ammonia-based cleaners which are mix with bleach. Be sure to use only clear ammonia and there is a sign of ammonia that it comes in cloudy and sudsy varieties.

Now you have to put the ammonia into a spray bottle and spray the ammonia on mouldy surfaces. After spraying it, you have to brush the area where you will spray it and remove mould from that surface. Leave that place for one or two hours and after that open the windows to keep air in. it is because of the smell of ammonia actually very strong. Wipeout that area at the end and after few hours checks that clean area.

Hydrogen peroxide

You can use this one solution to clean your bathroom and put 3% hydrogen peroxide in a dark spray bottle. If you want to clean it properly then you can add some vinegar solution in that. Perform it on the spots and clean the area after some time of spray. At the end clean that one with a brush and see the shine of that area.

These 5 solutions help you most and you can clean your bathroom easily. It actually beneficial for your health and you can remove the mould.


  • Caryl Coppa says:

    I like reading and I think this website got some genuinely utilitarian stuff on it! .

  • I’m also commenting to make you be aware of what a magnificent encounter my cousin’s girl gained browsing your webblog. She realized lots of issues, most notably how it is like to have an amazing coaching style to get most people with ease grasp various hard to do things. You really surpassed readers’ expected results. Many thanks for showing these beneficial, trustworthy, explanatory and cool tips about this topic to Janet.

  • The subsequent time I read a weblog, I hope that it doesnt disappoint me as much as this one. I mean, I do know it was my option to read, but I truly thought youd have one thing interesting to say. All I hear is a bunch of whining about something that you can fix for those who werent too busy on the lookout for attention.

  • Real clean internet site, thanks for this post.

  • You really make it seem so easy with your presentation but I find this topic to be really
    something that I think I would never understand.

    It seems too complex and extremely broad for me.
    I am looking forward for your next post, I will try to get the hang of

Leave a Reply

Name (required)

Email (required)


Show Buttons
Hide Buttons